No hub required, no additional fees

Sorry, this product is not yet available in your country

Be alerted when carbon monoxide is detected in your home, wherever you are

The Carbon Monoxide Alarm that alerts you wherever you are

If the Netatmo Smart Carbon Monoxide Alarm detects carbon monoxide in your home, it sets off its 85-decibel alarm and notifies you immediately on your smartphone. Essential for alerting your family and the emergency services when you're not at home!


A decade of serenity thanks to a 10-year battery*

The Netatmo Smart Carbon Monoxide Alarm is equipped with a 10-year* battery - the maximum lifetime for all carbon monoxide detectors. You’ll never have to change the batteries!


The Carbon Monoxide Alarm that tests itself

The Self-Test feature checks if the Smart Carbon Monoxide Alarm is functioning correctly. If it detects a problem, it sends a notification to your smartphone.


Fast installation

Install the Smart Carbon Monoxide Alarm in minutes simply by screwing it to the wall. Place it in any room with a fuel-burning appliance. Once fitted, download the Home + Security app.

Where do I install the Smart Carbon Monoxide Alarm?

For your safety, it is recommended to install one Smart Carbon Monoxide Alarm on every floor, in every room with a fuel-burning appliance (boiler, fireplace, wood-burning stove, gas cooker) and in every room with a heating duct.

For optimal protection, you can install an extra Smart Carbon Monoxide Alarm in the most used living rooms and in every bedroom.

Where to install animation

Enjoy the benefits of voice control and scenarios with other connected objects

Simply say: "Is there carbon monoxide in my home?"

Netatmo thermostat

If you have a Netatmo Smart Thermostat for your gas, oil or wood boiler, get a Netatmo Smart Carbon Monoxide Alarm. Since it's compatible with Apple HomeKit, you can create a scene so that your Netatmo Thermostat turns off the boiler as soon as the product detects carbon monoxide.

Discover the Smart Thermostat

Electrochemical sensor

85 dB alarm

Wi-Fi to receive remote alerts through your smartphone

Built-in 10-year battery*

LED indicators to display the device status

Bluetooth Low Energy for Apple HomeKit compatibility, to check the device status in real time, and to start the Alarm Test from your smartphone.

Часто задаваемые вопросы

Carbon monoxide (CO) is a colourless, odourless, tasteless, and potentially deadly toxic gas. It comes from the incomplete combustion of fuels such as wood, butane, coal, petrol, oil, natural gas, petroleum and propane. It prevents the blood's ability to transport oxygen. For your safety, it is recommended to install carbon monoxide detectors to measure carbon monoxide levels.
It depends on the level of exposure to carbon monoxide:
  • 100 ppm = Mild exposure. Mild headaches, nausea, vomiting, fatigue, flu-like symptoms.
  • 200 ppm = Medium exposure. Throbbing headaches, drowsiness, confusion, rapid heart rate.
  • 400 ppm = High exposure. Dizziness, nausea, visual impairment, muscular weakness. Risk of death after 3 hours of exposure.
  • 800 ppm = Extreme exposure. Convulsions, loss of consciousness, brain damage, heart and lung failure followed by death. Risk of death after 2 hours of exposure."
You can install an unlimited number of Netatmo Smart Carbon Monoxide Alarms in the Home + Security app.
The Smart Carbon Monoxide Alarm is a battery-powered device. The battery is built in. It was designed to cover the entire lifespan of the detector. For safety reasons and to guarantee maximum efficiency, all carbon monoxide detectors must be replaced after 10 years because the carbon monoxide detection sensor wears out over time.

A few weeks before the battery runs out, the product's fault LED will start to flash orange every minute and the alarm will beep twice every minute. Your detector will also send a low-battery alert to your smartphone.
No, you cannot link several Smart Carbon Monoxide Alarms, even if all the products appear in the same app.
No, the Smart Carbon Monoxide Alarm is a detector which doesn't detect the smoke. In fact, it's not recommended to have a two-in-one product because the ideal location for a carbon monoxide alarm isn't the same as that of a smoke alarm. A carbon monoxide detector must be placed on the wall as carbon monoxide mixes with the air, whereas a smoke detector must be placed on the ceiling because smoke rises very quickly. The Netatmo Smart Carbon Monoxide Alarm is an NF-certified product, a certification that doesn't certify two-in-one products, but only separate smoke alarms and carbon monoxide alarms.