Additional Smart Radiator Valve installation guide

Easy to install yourself

It’s easy to replace your existing thermostatic valves, even when the radiator is on. No technical expertise is required. NB: water cannot flow from the radiator during installation.

10 minutes

Several installation options

  • You’re replacing thermostatic valves

    Remplacez vos vannes thermostatiques actuelles en deux étapes. Les vannes thermostatiques sont graduées (généralement de 1 à 5).
    1/ Dévissez la vanne thermostatique actuelle.
    2/ Vissez la nouvelle Tête Thermostatique Intelligente Netatmo.

  • You’re replacing manual valves

    Les vannes manuelles pour radiateurs peuvent seulement allumer ou éteindre le chauffage. Elles ne sont pas graduées (la graduation standard est généralement de 1 à 5).
    Important : pour remplacer une vanne manuelle, vous devez contacter un professionnel.

Pack contents

  1. 1 Smart Radiator Valve
  2. 6 adaptateurs pour radiateurs (M30x1.5, M30x1.0, M28x1.5, Danfoss RAVL, Danfoss RA, Giacomini) qui conviennent à la majorité des radiateurs à eau chaude
  3. 4 coloured adhesives
  4. 2 AA batteries
  5. 1 installation manual

Compatible with heating systems that are already controlled via Netatmo

  • A home equipped with a Smart Thermostat

    Note: the Additional Smart Radiator Valve is compatible with both houses and apartments providing the individual heating system is controlled by a Netatmo Thermostat.

    Check compatibility

    Installation requirements

    a Smart Thermostat / Smart Modulating Thermostat or Smarther with Netatmo Thermostat, already installed

    a personal Wi-Fi network

    A compatible hot-water radiator system

    Check compatibility

  • A home equipped with a Starter Pack - Smart Radiator Valves

    Note: the Additional Smart Radiator Valve is compatible with apartments with collective heating systems providing it is already equipped with a Netatmo Starter Pack - Smart Radiator Valves.

    Check compatibility

    Installation requirements

    a Starter Pack - Smart Radiator Valves, already installed

    a personal Wi-Fi network

    A compatible hot-water radiator system

    Check compatibility

Operation

In an individual heating system, equipped with a Netatmo Smart Thermostat

Your Smart Outdoor Camera communicates via Wi-Fi with your internet router, without the need for an additional hub. You can then control your camera remotely from the Netatmo app.

Download the installation manual

In a collective heating system, equipped with a Starter Pack - Netatmo Radiator Valves (without a Thermostat)

Download the installation manual

FAQ

Which adapter do I need to install a Smart Radiator Valve on my radiator?

To check the compatibility of your radiator, you can use our online tool. (link to compatibility tool)

If you haven’t found your model of thermostatic valve through our tool, follow these steps to determine which adapter you should use: https://helpcenter.netatmo.com/fr/tete-thermostatique-intelligente/configuration-installation/quel-adaptateur-utiliser-pour-installer-ma-tete-thermostatique-intelligente

I can't physically install the Smart Radiator Valve, what should I do?

Check that your heating system is compatible with the Smart Radiator Valves using our online tool. (link to compatibility tool)

If your installation is not compatible with the Netatmo Radiator Valves or if you haven’t found your valve model, follow the instructions in the “adapter installation guide” provided with the Starter Pack. (Check out the guide)

My Smart Radiator Valve doesn’t respond when I put in the batteries, what should I do?

You can find all the information you need here: https://helpcenter.netatmo.com/fr/tete-thermostatique-intelligente/configuration-installation/ma-vanne-ne-reagit-pas-a-linsertion-des-piles-que-faire

Regulatory declarations

Buy products