Starter Pack - Smart Radiator Valves Installation Guide

Easy to install yourself

It’s easy to replace your existing thermostatic valves, even when the radiator is on. No technical expertise is required. NB: water cannot flow from the radiator during installation.

10 minutes

Several installation options

  • You’re replacing thermostatic valves

    Remplacez vos vannes thermostatiques actuelles en deux étapes. Les vannes thermostatiques sont graduées (généralement de 1 à 5).
    1/ Dévissez la vanne thermostatique actuelle.
    2/ Vissez la nouvelle Tête Thermostatique Intelligente Netatmo.

  • You’re replacing manual valves

    Les vannes manuelles pour radiateurs peuvent seulement allumer ou éteindre le chauffage. Elles ne sont pas graduées (la graduation standard est généralement de 1 à 5).
    Important : pour remplacer une vanne manuelle, vous devez contacter un professionnel.

Pack contents

  1. 2 x 2 AA batteries
  2. 1 installation manual
  3. 2 x 4 coloured adhesives
  4. 2 x 6 radiator adapters (M30x1.5, M30x1.0, M28x1.5x Danfoss RAVL, Danfoss RA, Giacomini) that suit most hot-water radiators
  5. 2 Smart Radiator Valves
  6. 1 Relay
  7. 1 mains adapter for the Relay

Compatible with collective and district heating systems

  • Apartment with collective heating, without a thermostat

    Collective heating refers to a boiler that produces heat for several apartments in the same building.

    Check the compatibility of my heating

    Installation requirements

    A compatible hot-water radiator system

    a personal Wi-Fi network

    one of these energy sources: Gas, Oil, Wood, Heat pump

    Check the compatibility of my heating

  • Apartment with district heating, without a thermostat

    District heating is the centralised production of heat for apartments in various buildings or even a whole neighbourhood.

    Check the compatibility of my heating

    Installation requirements

    a personal Wi-Fi network

    one of these energy sources: Gas, Oil, Wood, Heat pump

    A compatible hot-water radiator system

    Check the compatibility of my heating

Operation

In this system, the Netatmo relay is connected to your boiler and controls your heating.
It communicates via radio with the Netatmo Thermostat that you use to set the temperature.
The relay ensures the Wi-Fi connection to the internet and remote control from the Netatmo app.

Download the installation manual

FAQ

Which adapter do I need to install a Smart Radiator Valve on my radiator?

To check the compatibility of your radiator, you can use our online tool. (link to compatibility tool)

If you haven’t found your model of thermostatic valve through our tool, follow these steps to determine which adapter you should use: https://helpcenter.netatmo.com/fr/tete-thermostatique-intelligente/configuration-installation/quel-adaptateur-utiliser-pour-installer-ma-tete-thermostatique-intelligente

I can't physically install the Smart Radiator Valve, what should I do?

Check that your heating system is compatible with the Smart Radiator Valves using our online tool. (link to compatibility tool)

If your installation is not compatible with the Netatmo Radiator Valves or if you haven’t found your valve model, follow the instructions in the “adapter installation guide” provided with the Starter Pack. (Check out the guide)

My Smart Radiator Valve doesn’t respond when I put in the batteries, what should I do?

You can find all the information you need here: https://helpcenter.netatmo.com/fr/tete-thermostatique-intelligente/configuration-installation/ma-vanne-ne-reagit-pas-a-linsertion-des-piles-que-faire

Regulatory declarations