This product is not available in your country.
Installation of the Smart Video Doorbell
Easy to install yourself
Peace of mind! That’s what the Netatmo Smart Video Doorbell offers. Once connected to the mains, you don’t have to worry about changing batteries. You can install the Doorbell yourself if you have a wired doorbell with a chime or if it’s your first doorbell.
45 minutes
Installation of the Smart Video Doorbell
With chime
Perfect for replacing a wired doorbell with chime
Without chime
Perfect for when there’s no existing wired connection, as you can use the Netatmo Transformers (sold separately)
Install the Video Doorbell without a chime using one of two transformers
Pack contents
- 1 Smart Video Doorbell
- 1 wall-bracket
- 1 25° bracket
- 1 cover
- 1 chime module
- 1 wire connector
- 1 drilling template
- 1 extra fuse
- 1 HomeKit card
- 2 mounting clips
- Screw and dowel set
- 1 security screw and its custom tool
- 1 installation guide
Your smart speaker becomes your chime
Your smart speaker will ring when a visitor presses the Netatmo Video Doorbell thanks to its compatibility with Apple HomeKit, Amazon Alexa et Google Home voice assistants.
Compatible configurations
Operation
Your wired chime is located next to your door
The Netatmo Smart Video Doorbell is connected to your chime via your existing electrical wiring.
The location of your chime may vary: it is generally found near your door or in your electrical panel.
Please note that, like most wired doorbells, the Smart Video Doorbell's push-button operates on low power.
The Netatmo chime module is therefore essential as it regulates the current between your chime and the Smart Video Doorbell.
This means it’s compatible with almost all chimes powered by 8-24 VAC & 230 VAC.
Your Smart Video Doorbell communicates via Wi-Fi with your router, with no need for an extra hub. You can therefore control your Doorbell remotely from wherever you are!
Download the installation manual
Your chime is located in the electrical panel
The Netatmo Smart Video Doorbell is connected to your chime via your existing electrical wiring.
The location of your chime may vary: it is generally found near your door or in your electrical panel.
Please note that, like most wired doorbells, the Smart Video Doorbell's push-button operates on low power.
The Netatmo chime module is therefore essential as it regulates the current between your chime and the Smart Video Doorbell.
This means it’s compatible with almost all chimes powered by 8-24 VAC & 230 VAC.
Your Smart Video Doorbell communicates via Wi-Fi with your router, with no need for an extra hub. You can therefore control your Doorbell remotely from wherever you are!
Download the installation manual
Installation without a chime, plug-in connection
The Netatmo Smart Video Doorbell can be easily installed using the Plug-in Transformer.
Plug the Plug-in Transformer into a power outlet in your home, drill a hole in your wall at the level of the Video Doorbell and feed the cables through. All that's left to do is connect the Transformer to your Netatmo Doorbell. Cable length 10 m.
The Video Doorbell isn't connected to a chime. So, when a visitor rings your doorbell, it will ring on your phone and it can also ring on Apple, Alexa or Google smart speakers!
Download the installation manual
Installation without a chime, in-wall connection
La Sonnette Vidéo Intelligente Netatmo peut s’installer sans câble apparent à l’aide de l’Adaptateur Encastrable Netatmo.
Reliez l'Adaptateur Encastrable à la Sonnette Vidéo Netatmo et connectez-le aux fils électriques existants cachés dans le mur. Cette installation requiert des connaissances en électricité.
La Sonnette Vidéo n’est reliée à aucun carillon, lorsque le visiteur sonne à votre porte, la sonnerie retentit sur votre téléphone et elle peut aussi sonner sur les enceintes connectées Apple, Alexa ou Google !
Download the installation manual