Smart Alarm System with Camera
A tailored schedule
Room-by-room comfort
Remote control dashboard
Open Window Detection
Smart Regulation
Manual Boost
Remote control dashboard
Control your radiators with our Energy app or Legrand's Home + Control App. Change the temperature room by room from your bed or from the other side of the world.
Schedule your heating for your return from a holiday.
Room-by-room comfort
Fine-tune your comfort temperature room-by-room.
Living room: 19°C
Bedroom: 17°C
Bathroom: 19°C
A room-by-room heating schedule
Benefit from a schedule based on your daily routine. Heat only when and where you need it.
Night mode
Save energy while you sleep. Heat only the bedrooms and decrease the temperature in the rest of the house.
Comfort mode
Enjoy optimal comfort in your living area and save energy in unoccupied rooms.
Eco mode
Save energy when you are away. Decrease the temperature in all rooms.
Comfort + mode
Increase the temperature in your bathroom and maintain optimal comfort in the rest of the house.
Night mode
Comfort mode
Eco mode
Comfort + mode
Smart heating in your home
Open Window Detection
When the Smart Radiator Valve detects a window is open, it switches off the heating in the room to prevent energy waste.
Smart Regulation
The Smart Radiator Valve analyzes the room environment in real time and adjusts heating according to sunshine level and room use.
Manual Boost
When needed, the temperature can be temporarily raised in a specific room for 3 hours.
Controlling your heating just got much cooler, just ask or text
Just say: "Siri, set my bathroom temperature to 19 °C"
Simple and elegant design
4 interchangeable colours
Customise your Valve with one of the four colour adhesive strips provided.
Mechanics and design
Optimized for energy savings, 2-year battery life.
Translucent plexiglass cylinder
Opt for a timeless, minimalist design.
Manual temperature adjustment
Turn up the Valve to manually change the temperature setpoint.
Real-time temperature
Display the real time temperature in the room.
Save even more energy
Complete your Starter Pack for district heating with the Additional Smart Radiator Valves to control all of your radiators.
Learn more
FAQ
The pack for district heating is suitable for households that do not have a central thermostat and are heated by a collective heating system (shared boiler with other households) or by district heating (heat network from a geothermal source or cogeneration plant). In these cases, it is possible to have up to 20 Smart Radiator Valves per installation.
The Smart Radiator Valves use two integrated temperature sensors to gauge the temperature of a room. They compare the temperature measured in the room against the setpoint temperature to control the flow of hot water to the radiator in order to reach the desired temperature in the room.
No, the Thermostat Relay would then conflict with the Relay in the collective heating pack. If you already have a Netatmo Thermostat, you will need to buy one or more Additional Smart Radiator Valves.
Up to 100 metres in an open space. We recommend that the Relay is placed in a central point in your home.
The Smart Radiator Valves are compatible with 90% of hot-water radiators. Compatibility depends on the valve body installed on the radiator. Six adapter types are included in the Smart Radiator Valve packs (six adapters per valve) and five additional adapter types are available to buy separately from the Netatmo online store. Go to check.netatmo.com for more information.
We recommend contacting a professional to have your current valve body units replaced with compatible thermostatic valves.